Otis Technology Patriot Series Cleaning Kit (Select Your Caliber)

Everything besides cleaner and oil that is needed to properly clean a 9mm pistol

First, I have seen comments where folks said they had to purchase a rod for the chamber brush. Check to see if you kit came with THREE Small Brass rods, each about 3" Long. Two have Female threads on both ends and one has a Male on one end female on the other. 2) Check to see if the kit contained a Knurled Knob, it has a male thread and the knurled portion has a hole drilled through perpendicular to knob. Screw the knob into the female end of the rod with the male end. Screw a double female rod to this. Screw your chamber brush or chamber mop into the end . Then INSERT the remaining 3rd rod into knobI LOVE the KIt, The case is flimsy BUT i don't plan on bringing it to the range. The Patches have a bit of a learning curve to get that "Flower Petal" shape. I negative, The patches also shed fibre but all patches, including Hoppes do.I'm not a Smart (stupid) Phone addict, BUT I will attempt to get a friend to help me post some photos

The bristles on the bore brush bend easily but other than that it’s a great product

While this Patriot Series kit is caliber-specific, if you get one for a rifle with the 8/32" cable, you can pretty much make it multi-caliber with only a few additional pieces.Otis makes a big and small patch loop. The small patch loop will work for 5.56/.22 while the big loop will work for 9mm/45 and .308/7.62 - so buy whatever doesn't come with your kit.The short Otis cable is nice to have for a pistol (easier to handle) but not mandatory, you can run a 36" cable through a Glock barrel if need be, but you'll be hard pressed to find a better tool than the Glock barrel tool with a 12 gauge patch stuck through its built-in loop soaked with Boretech C4. Just run that back/forth through your Glock barrel a few times, repeat with a few more patches and it will be clean in no time.For 12 gauge, Otis used to have this giant patch loop that fits over a standard 8/32" cable end. I see in their current 12 gauge kits they include a slimmed down giant patch loop that fits in the same cables. Either way, buy one of these for 410/20 and 12 gauge (or whatever gauge you shoot) with the rubber bushing and follow the instructions.The Patriot kit for 5.56/.223 MSR's includes cleaning rods and the 5.56 chamber brush already, so all I did was throw in a 9mm bore brush, .30 cal bore brush, 12 gauge bore brush, .30 cal bore brush, big patch loop, 12 gauge loop and bushing, some extra patches and had a multi-caliber kit.Otis also has a 3-gun kit which I have, but threw in a .30 cal bore brush to make it a 4-gun kit. Haha. I also removed all of the attachments from the built-in tray and threw them in individual zip locs. That try takes up way too much room.I used to solely use Otis kits for cleaning, and this went on for more than a decade until I bought a borescope and saw how poorly they kept my bores clean. I have switched to carbon fiber cleaning rods with push jags and and Boretech cleaning products. I can get a bore factory-clean without using a single bore brush to scrub the rings/grooves.However, Otis is still my go-to cleaning kit for field expedient methods of cleaning or when I need a quick touch-up cleaning/lube/preservation without breaking out my whole table top cleaning setup.This Patriot Series kit includes everything you'd need for an AR15 or .223/5.56 modern sporting rifle. It has the chamber brush, 3 rods w/ T-handle, as well as a plastic t-handle for the cable, etc...The secret to keeping an AR15/MSR functioning is to keep that chamber clean. When hard carbon deposits or gunk starts collecting, it can cause failures to extract. This is regardless if you're direct impingement, piston-driven, or using some uber high speed low drag HK416/SCAR setup - that 5.56/.223 chamber needs to be kept clean. Using brass-cased ammo will help the most, but for some that want to use the polymer-coated steel cased stuff, keeping the chamber clean is key. So the Otis kits come in handy due to the small size of the kit and versatility in the field.The 3" Otis patches are overkill for .223/5.56, you want to run the 2" Otis patches and just follow the instructions when folding. It's not a big deal once you get the hang of it, and I often use the round patches 2-3 times before I toss them as the cotton tends to stretch/shred.For some reason, Otis now includes a .25 cal brush for 5.56. I thought it was a mistake until I rotated the brush and saw the engraving for both .25 and 5.56 on the same brush. I always felt their .22 brushes were "loose" in 5.56 barrel but like I said, I don't really run bore brushes anymore thanks to Boretech especially with chrome lined bores. But for a field kit, the Patriot series is a great foundation.

All my products from company are quality

Works as needed. Murica

Switched to all Otis kits. Good quality and it allows cleaning from the breach to the end of barrel. No more pushing crud down into the breach as i did in the old days. A bonus for me is being able to get the right components for the caliber fast, no hunting and trying to figure out which brush/patch holder is which.Like the circle patches much much better than old squares. Good buy, bought one for each caliber I have

The white cleaning pad attachment is too small for the barrel and can only be used once. Try Shotgunpig.com for something that will work better and have reliability.

Quality of the tool’s are fine. Case came cracked and the latch is just a bendy piece of plastic. Seem’s kinda pricey as well at $55.88 CAD. I’d give it 4.5 stars if I could.

Just a nice set and good quality

Le (très) petit paquet ne contient pas la poignée (la fameuse T-Handle) qui se visse sur la tige porte-écouvillons, ce kit est par conséquent inutilisable en l'état. De plus les écouvillons sont si petits et étroits que j'ai pensé au début que c'était pour du calibre 22 ! Ils sont sous-calibrés c'est évident. Cela m'apprendra à acheter à un vendeur autre qu' Amazon. Cerise sur le gâteau sachez également que si vous décidez de retourner le produit, les fais de port seront à votre charge. je mets donc une étoile car je ne peux pas en mettre moins.

Nettoyage de mes armes de tir . Excellent ! !!

Very pleased with this. I've a Ruger 10/22 and on the Ruger web site they recommend in a tech tips video using a kit that looks pretty identical to this as the flexible "rod" enables breech to muzzle cleaning more easily than a bore snake while not requiring complete removal of the barrel. Nice little kit and I've replaced a couple of the screw heads supplied with some Allen key bits so I have all I need in the one box to strip my rifle down.