JETech Screen Protector for iPhone SE 3/2 (2022/2020 Edition) 4.7-Inch, Tempered Glass Film, 3-Pack

A brilliant screen Protector. Thicker than most on the market and easy to fit. Good value.

Sturdy and durable cover for iPhone. Simple to apply

Let’s face it - no screen protector is ‘easy’ to install. But this is probably the easiest of the many I’ve tried (that weird frame thing with a much more expensive rival brand drove me bonkers). I liked the three stage cleaning that came with this and the fact you get three screens. For the first time EVER I got the thing on my phone without a single smear, hair or speck of dust, and no bubbles either! The drawback for me is that my phone is a 2020 SE and as many have mentioned, the protector doesn’t reach to the edges of the screen - you end up with a couple of millimetres all around the edge. However if your case has a raised lip as mine does, it doesn’t seem to matter about the slight gap. And it’s MUCH better value that the “other brand” which did cover the whole screen. And did I mention I got NO bubbles, hair, dust etc?? A winner.

Excellent product , easy to use and very effective

Really pleased with the finished result. No bubbles. Perfectly clear screen. Touch all works fine. Only needed one of the 3 screens provided. Yes it is a smaller than the full glass area, but it has to be, because the phone's glass front curves away. But the fit is that good it almost looks like the phone's glass was manufactured that way.Needless to say, my suggestions here are in addition to the instructions that come with it!First thing I did was to check I had the correct part, given the packaging does not say what phones they are for. If you check the original Amazon description, the part specific to iPhone SE 2020 has a part number starting 0807, whereas the older iPhone 7/8/SE part has a part number starting 0806, so be sure you have the 0807 part.When it comes to fitting the protector, preparation is key. I used a freshly cleaned tray, with some kitchen towel on it, and with all the bits to hand. And I made sure to do it at a time when I was not pushed for time; this is not a job to feel you need to rush at!One thing I did that the instructions don't tell you, was to clean the BACK of the phone, to be sure the hinge stickers stay stuck on properly while you need them to. Did this with the cleaning swab and drying off cloth that comes with the kit. The hinge stickers stayed firmly stuck in place all the time I needed them to.Then with hinge stickers in place on the back, and with the screen protector aligned on the top, ensure to keep the hinge tapes slack-free when pulling them round and sticking across onto the protector; just tight enough to ensure no slack. Once the hinges are on, then double check - gently pull the screen protector to the left (assuming hinges on right) against the hinges, and check it is aligned spot on. For alignment I used the slotted hole at the top and the home button cut-out at the bottom. If not quite right then just adjust the hinge positions until OK.Once the phone's screen is dust free as per instructions, then after removing the protective strip, you can just lay the screen down, pulling to the left against the hinges as you do so - if you did the previous bits OK then it will be lined up perfectly.Yes there will be bubbles, but no worries - they are easy to sort and no need to rush when sorting them. As the instructions say, just gently lift corners, then smooth the bubbles back out towards the corners again. Took a few goes in some cases, but it did work well.Very pleased with the finished result. Been in my pocket a few days now, with no sign of any scratches so far.

Easy to fit and feels good and durable.

I’ve had screen protectors before where the protector is in a box that aligns it to your phone for you, so I was surprised to find you have to use stickers to manually align this one. Miraculously, I managed to align it quite well, but it was a bit stressful. There was an air bubble remaining, so I lifted the corner as suggested and managed to get it out no problem. The package comes with three protectors, which I hadn’t realised. I hope I only ever need this one.

Affordable and once done seems to work well. However, it's important to align the screen protector in the best position, hold in place temporarily, then carefully, lightly attach the 2 pieces of tape while you're holding the screen protector in position. Make sure you don't peel off the screen protector film until you're ready to 'attach' it to your screen -- otherwise, you may get dust, fingerprints, etc., on the wrong side of the screen protector. Getting all the air bubbles out might be tricky: but removing most might be enough.